 |
CLOSING UNIT |
|
|
| Clamping force |
kn |
250 |
| Stroke |
mm |
300x2 |
| Maximum daylight |
mm |
1000 |
| Minimum daylight |
mm |
400 |
| Dimension between the columns |
mm |
500x700 |
| Maximum closing speed |
mm/sec |
600 |
 |
EXTRUDERS
|
|
E 70-24 |
E 80-24 |
| Revolutions per minute |
rpm |
5-102 |
8-95 |
| Maximum output in HDPE |
kg/h |
110 |
165 |
| Heating power |
kW |
13,1 |
18,3 |
| Extruder motor power |
kW |
36.3 |
58 |
| The capacities of the extruders are indicative and refer to virgin HDPE. They can vary according to the type of plastic employed. |
 |
ACCUMULATOR HEADS |
|
|
|
| Accumulator capacity |
PE - kg |
2,5 |
3,5 |
| MAximum accumulator volume |
L |
3,41 |
4,6 |
| Head tooling min diameter |
mm |
30 |
30 |
| Head tooling max diameter |
mm |
220 |
220 |
| Heating power |
kW |
14 |
15,2 |
| Termoregulating zone |
n° |
6 |
6 |
| LAY-OUT AE25 - GENERAL (indicative) |
|
|
| Total max installed power |
kW |
114,5 |
| Average electric consumption (80%) |
kW |
91,6 |
| Indicative air consumption (excluding cooling air) |
mc/h |
20 |
| Hydraulic/Oil/Head/Gripper cooling equipment |
kcal/h |
15000 |
| Mould cooling |
kcal/h |
25000 |
| Machine dimensions width/lenght/height |
m |
5,60/2,28/4,3 |
| Total weight |
kg |
13400 |
Machine is designed and manufactured according to the "CE" Standards and all models conform to the specifications of the blow moulders manufactures association. All machine are delivered with certificates relating to the specific assembled on the machine.
|